|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: is there better way to connect wires other wire nut? posted by michaelv20850 on April 20, 2007 at 13:58:57:
Most wire nuts contain steel springs and are bad for sound. The connection will be dirty and noisy once the copper corrodes. You would get better results, IMO, by splicing and soldering the connections. Use polyolefin heat-shrink and beef up the insulation with rubber electrical tape.If you connect the choke body to AC safety-earth, try it with a direct connection and with an anti-parallel pair of 6-amp rectifier diodes in the safety-earth lead.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Solder, heat-shrink, tape-wrap. - Al Sekela 17:08:36 04/20/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
