|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: (sort of) DIY roller blocks posted by yotacowboy on April 13, 2007 at 17:02:41:
You might want to try some acoustic damping around the edges of your cups.I made some crude ones recently from stainless steel spoon bowls fitted in to ebony bases with steel-bearing epoxy. The friend I made them for is quite pleased with them. The ebony has good acoustic damping properties without adding too much vertical compliance.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Good for you! - Al Sekela 10:43:46 04/15/07 (3)
- Re: Good for you! - yotacowboy 10:55:08 04/15/07 (2)
- not sure it can be done in reality - bartc 11:41:01 04/15/07 (1)
- absolutely - dave c 14:32:01 04/15/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
