|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Substitute 5 watter for 7 watter in crossover? posted by kenster on February 12, 2007 at 07:18:43:
The Alcap electrolytic with same (though the newer one is smaller in size but same exact value and voltage rating). I noticed the woofer wires had some green going on, so figured I'd do the Alcap and rewire the woofer. Leaving the inductors alone (I have no idea of their value and would'nt mess with them anyway). Then I started thinking maybe I'll wire the tweeter too. There is no board, everything is kind of twisted up together with a touch of solder at the joints. So I figured I might as well replace the resistors too while I'm at it.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Substitute 5 watter for 7 watter in crossover? - hairydog 12:10:41 02/12/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
