|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: wtf just happened ?!?!?! posted by snkby on February 2, 2007 at 19:36:54:
using the headphone out i get 144.5mv on the left and 2.0mv on the right.using the line-out i get 2.0mv for both channels.
i was using the attenuator of the headphone out to drive the marchand xm-1 active xover.
the cdp has always had a nasty little --pop-- if you skip tracks or program tracks but no pop when started from beginning to end.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- just measured dc offset for the cdp and - snkby 21:06:53 02/02/07 (6)
- also just remembered that this morning - snkby 22:10:17 02/02/07 (5)
- I don't see that hurting the driver - Russ57 05:50:38 02/03/07 (4)
- hey russ57!! i think you may have - snkby 09:20:31 02/03/07 (3)
- Re: hey russ57!! i think you may have - robdd99 10:30:57 02/05/07 (1)
- duct tape would have been better. but whats - snkby 12:45:25 02/05/07 (0)
- Think about this a little more - Owen 04:11:18 02/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
