|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Soldering won't melt the fuse wire? posted by Dave Pogue on January 9, 2007 at 04:51:28:
No,(tried, even smaller than 250mA ones), Just don't apply too much heat for too long.
The only problem I can think of is the fuse metal parts resistance to soldering, You must use a soldering paste or something similar, and then test the joints mechanically by trying to pull the wires from the fuse. All'n'all not a very safe way to go.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Soldering won't melt the fuse wire? - ramw 05:34:16 01/09/07 (7)
- Re: Soldering won't melt the fuse wire? - JB 09:44:32 01/09/07 (2)
- Then watch the end caps come off... - Thomas Martens 12:36:36 01/09/07 (1)
- LOL...yes if your using a 100 watt soldering iron...... - kenster 16:13:11 01/09/07 (0)
- Oh no! not the fuse thing again!... - Thomas Martens 09:10:26 01/09/07 (3)
- Re: Oh no! not the fuse thing again!... - kenster 16:06:14 01/09/07 (2)
- Well,... - Thomas Martens 14:34:16 01/13/07 (1)
- Re: Well,... - kenster 15:01:57 01/13/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
