|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I'd bet it does! posted by bartc on December 18, 2006 at 05:55:33:
Thanx for the advice. I thought steel clamping plates and screws are in actual contact with the wire. Therefore they should have more direct influence into the audio signal.It's too bad that outlets are so difficult to disassemble. I almost dismantled one just trying to remove the screws.
BTW, does the magnet trick apply to IG outlets as well? Does the size of magnet make much difference?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I'd bet it does! - bkst140 20:30:47 12/18/06 (7)
- Re: I'd bet it does! - bartc 06:02:00 12/19/06 (6)
- Re: I'd bet it does! - bkst140 08:08:02 12/20/06 (5)
- Ebay and your local hardware store - bartc 05:47:32 12/21/06 (4)
- Re: Ebay and your local hardware store - bkst140 18:37:28 12/26/06 (3)
- I can only pass on experience and info/misinfo! - bartc 19:41:47 12/26/06 (2)
- Now it sounds more challenging - bkst140 16:47:21 12/28/06 (1)
- Well, it isn't really hard but it isn't really easy either - bartc 21:03:35 12/28/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
