|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
An Oyaide SWO-XXX has just arrived home, along with some Oyaide AC and IEC plugs
The plugs came with very clear installation instructions, but the wall socket didn’t.
They are written in Japanese.
So, which is the best way to wire the SWO-XXX? I have only one live, neutral and ground wire. Should I split in two each wire and put it in the holes at the back or is it safe and wise to use the screws for each cable without splitting?
In a previous post Guitarplayer wrote that some people say that the Oyaides sounds better when the wires is wrapped around the screws instead of putting the cables in the holes in the back.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Oyaide SWO-XXX: Best way to install it? - Juan 08:11:22 02/20/06 (32)
- A different opinion. - cdb 19:59:45 02/21/06 (7)
- Re: A different opinion. - jea48 15:24:30 02/22/06 (0)
- Re: A different opinion. - Juan 21:34:23 02/21/06 (5)
- Hi, what part of the world are you located? - cdb 20:00:43 02/22/06 (3)
- Re: Hi, what part of the world are you located? - Juan 20:33:19 02/22/06 (2)
- Re: Hi, what part of the world are you located? - cdb 20:51:16 02/23/06 (1)
- Re: Hi, what part of the world are you located? - Juan 06:18:16 02/24/06 (0)
- I mean bare wire ends - Juan 21:40:54 02/21/06 (0)
- Thank you all (nt) - Juan 20:08:09 02/20/06 (0)
- Re: Oyaide SWO-XXX: Best way to install it? - jea48 17:18:11 02/20/06 (12)
- Re: Oyaide SWO-XXX: Best way to install it? - alan m. kafton 17:51:35 02/20/06 (11)
- Re: Oyaide SWO-XXX: Best way to install it? - Sondek 07:29:16 02/21/06 (10)
- Re: Well, o.k.... - alan m. kafton 08:14:15 02/21/06 (9)
- Re: Well, o.k.... - Duster 15:55:28 02/21/06 (8)
- Maybe not... - cdb 20:31:28 02/21/06 (3)
- Re: Maybe not... - Duster 16:14:29 02/23/06 (2)
- I'd be impressed w/ 316 stainless yokes - cdb 21:00:24 02/23/06 (1)
- Brass is commonly used for backstraps (nt) - Duster 16:56:20 02/24/06 (0)
- Re: Over the top? - alan m. kafton 16:54:39 02/21/06 (3)
- Hi Niles- how's Frazier? - cdb 20:02:50 02/22/06 (1)
- Re: They're both in therapy. [nt] - alan m. kafton 21:38:32 02/22/06 (0)
- ;-) nt - Duster 17:25:56 02/21/06 (0)
- Use the screws... - Duster 11:05:48 02/20/06 (9)
- Re: Use the screws... - jea48 14:04:24 02/20/06 (0)
- Have you compared the two hookup methods? - LarBo 12:09:47 02/20/06 (7)
- maximal contact area - MikeInSeattle 13:05:20 02/20/06 (6)
- I use the back - faithnomorefreak 13:16:26 02/20/06 (3)
- Re: I use the back - bigdog 14:23:58 02/20/06 (1)
- Re: Yes....S.O.P....always clean the leads. [nt] - alan m. kafton 16:16:48 02/20/06 (0)
- Re: I agree....superb clamping, and it's less work. [nt] - alan m. kafton 14:19:11 02/20/06 (0)
- Yup, makes sense. - LarBo 13:13:38 02/20/06 (1)
- Re: Yup, makes sense. - cdb 20:18:37 02/22/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
