Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

RE: Sums it up nicely. nt

So much misinformation - doesn't anyone study the tube datasheets anymore or apply some thinking?

What caueses a filament to fail? Thermal expansion and contraction. Some datasheets will tell you that the filament life expectancy is e.g. 2000 hours when turned on not more than x times / day.

Some driver tubes will light up like a flash bulb when initially switched on.

Similarly tubes do not take too kindly to being cold and getting more than B+ on them - it does damage to the cathode coating.

The 300B was developped for telephone purposes and would seldom be replaced 100 000 hours of continous duty was normal.

When I build my tube amplifiers I would
a) Put a number of NTC's in series with the primary of the mains transformer ensuring gladual heat up of filaments. NTC's to be switched out with a thermal delay relay (keeping heat under chassis down).
b) I used hexfed recitifiers but that causes aproblem: until the tubes are warmed up the B+ is above the operating B+ voltage which was solved by using a damper diode to the CT of the HT winding.

Initially I switched off at night and on again in the morning (14 ~ 16 hour running/day). Later I swicthed on on Monday morning and off on Friday night.

All tubes mesureed like new after 20 000 hours. Output tubes were run in class A at design centre rating, not at absolute maximum rating.

c) Power supply was stabilised - I've got a computer server room UPS that first converts to DC and then reconstructs pure sinus mains. US military noticed imcreased life expectancy when mains voltage was kept stable +/- 3%.

d) And if you are running tubes hard (output) than a Pearl HiFi tube cooler can extend the life of a tube by 50% ~ 100%. It may not look sexy but it works and your wallet will thank you with current tube prices and some newer tubes no longer available.




Edits: 08/18/23

This post is made possible by the generous support of people like you and our sponsors:
  Atma-Sphere Music Systems, Inc.  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.