|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: I ordered an adapter posted by 1973shovel on March 17, 2023 at 07:33:19:
I'm going to assume that you have a continuity function on the meter you use to check tube bias. If so, above is a crosscheck I came up with from the data sheets of the two tubes, to be certain that the adapter is wired correctly before you use it in your amp. I wasn't willing to leave the adapter to "It's probably OK", and it only took a minute to test.
The column on the left are the 12AU7 pins, and on the right are the corresponding 6SN7 sockets.
Good luck with it, and I strongly suspect you'll soon be a member of the 90% Club (who prefer the 6SN7 over the 12AU7 in the VTA). Please keep us posted.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Continuity meter - 1973shovel 08:07:54 03/17/23 (1)
- Thanks again! - JoshT 10:57:10 03/17/23 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
