|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
I have an asian made tube amp. I live in usa. Back of amp says only use a 250 volt fuse. Should I be using a 250 volt fuse or ignore this as it was modified to run on 110 volts. would it make a difference if i used a 250 volt fuse as long as i used the proper amperage.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Fuse question - jboat1 17:29:44 02/22/07 (6)
- You will be fine with a 125 volt fuse (nt) - lipmanl 07:35:44 02/23/07 (0)
- Re: Fuse question - Poindexter 17:39:05 02/22/07 (4)
- Not so fast.... - JoeKool 22:58:15 02/22/07 (3)
- Not actual factual - Ron Oehlert 11:00:15 02/23/07 (0)
- You are both right - Russ57 04:54:55 02/23/07 (1)
- Thank you, Russ. - Poindexter 07:46:26 02/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
