Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

good points, BTAgain when was the last time you checked / set-up - on the arm and cartridge?

It is entirely possible that the new tubes are also brighter than yr previous tubes were / back when they were working well. The 7308 is still a frame grid triode and yrs may have a little extra microphony than usual / resonances which can make transient surface noise more noticeable.

As can the state of your set-up!

Especially the arm mounting screws and the cartridge bolts? TF and antiskating, and damping if relevant. Try thre tiny balls of blutak 'tween cart and mounting, too.

IME TT suspension set-up, if relevant to your case, can play a role here too - check your levelling.

SN can and should be minimisable with good set-up.

And what's left should not be IN with the music/players but hang separately, IME to the outside / front of the sound-space.


Warmest

Timbo in Oz
The Skyptical Mensurer and Audio Scrounger

'Still not saluting.'

Read about and view system at:

http://www.theanalogdept.com/tim_bailey.htm


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups
  • good points, BTAgain when was the last time you checked / set-up - on the arm and cartridge? - Timbo in Oz 05:50:37 10/01/06 (0)


You can not post to an archived thread.