|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Do 12AT7s fail at higher rates than similar 12--7s. posted by Mechans on August 10, 2006 at 14:12:51:
as this tube was made by multiple vendors over the years. The fact that they were designed into circuits over the years tells me that the device's specifications certainly made sense at the time of design and the device's relative costs were competitive for manufacturing.That said, if there was a problem with a tube, I'd expect to see one vendor's line - or perhaps some bad lots due to some manufacturing defect. Believe me, that vendor would not have lasted long in the marketplace if they were building a substandard tube.
So, I would not put credence in your asssetion, sir.
Cheers,
David
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Not so sure I'd throw a blanket assumption on them.... - doodlebug 14:50:47 08/10/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
