|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: 6C41C Plate resistence , help !!! posted by Aldovan on February 7, 2006 at 04:45:02:
Plate resistance at that point is easy to calculate. Draw a straight line tangent to the curve at the operating point, then measure its slope. Nominal plate resistance is 150 Ohm.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 06:29:33 02/07/06 (16)
- Re: 6C41C Plate resistence , help !!! - Aldovan 10:56:02 02/07/06 (15)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 13:17:05 02/07/06 (14)
- Re: 6C41C Plate resistence , help !!! - Ivan303 16:53:49 02/07/06 (2)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 17:26:07 02/07/06 (1)
- Re: 6C41C Plate resistence , help !!! - Ivan303 18:05:19 02/07/06 (0)
- Re: 6C41C Plate resistence , help !!! - Aldovan 15:13:50 02/07/06 (10)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 15:29:21 02/07/06 (9)
- Re: 6C41C Plate resistence , help !!! - Aldovan 19:11:53 02/07/06 (8)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 06:13:54 02/08/06 (7)
- Re: 6C41C Plate resistence , help !!! - Aldovan 07:36:19 02/08/06 (6)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 07:44:30 02/08/06 (5)
- Re: 6C41C Plate resistence , help !!! - Aldovan 08:28:29 02/08/06 (4)
- Re: 6C41C Plate resistence , help !!! - Victor Khomenko 11:10:52 02/08/06 (3)
- Re: 6C41C Plate resistence , help !!! - Aldovan 11:25:11 02/08/06 (2)
- Just make sure your inductor can handle that 200mA current. (nt) - Victor Khomenko 11:40:29 02/08/06 (1)
- Re: Just make sure your inductor can handle that 200mA current. (nt) - Aldovan 12:22:55 02/08/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
