|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Help on testing 12fq7 posted by Stephen D on January 17, 2006 at 21:10:55:
Hi Stephen:If your tester has settings for 6FQ7 (or 6CG7, same thing), use those settings except set the filament voltage to 12.6V instead of 6.3V.
Hope this helps! Al
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Help on testing 12fq7 - Alpha Al 21:14:59 01/17/06 (1)
- Re: Help on testing 12fq7 - Stephen D 21:22:06 01/17/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
