|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Distortion from EAR 834P. Bad tubes? posted by anon on June 12, 2005 at 19:39:31:
No, the loading is not adjustable. The MC/MM gain is a switch setting. Not much good in the MM setting.Other changes: a brand new MG-1 air bearing tonearm and a ZYX R-100H cartridge. Before that I have a DIY air bearing arm (sort of a ET2 clone) and an ancient Audio Technica cartridge. I was having massive distortion problems with that rig, which I attributed to too much horizontal effective mass on the arm and the AT being worn-out. My first hunch was that the ZYX was not quite set up correctly, but when I switched to the Dennessen preamp and the distortion went away I started suspecting otherwise.
Thanks for your help. Any further thoughts would be appreciated.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Distortion from EAR 834P. Bad tubes? - Uncle Stu 18:00:15 06/14/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
