Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it.

---

[ Follow Ups ] Thread: [ Display  All  Email ] [ Digital Drive ]

---

[ Alert Moderator ]

---

Re: Accuphase DP-57

Posted by Audio Pharaoh (A) on June 24, 2006 at 09:27:04

In Reply to: Accuphase DP-57 posted by audiophile121 on June 23, 2006 at 20:27:11:

Hi,

All Accuphase players have the Pin 3 Hot instead of the 'normal' Pin 2 in most other brands. So, if you're using ONLY the Accuphase in ur main rig and want to connect it thru XLR, you need to either adjust the 'Polarity' switch on your preamp or reverse the + & - leads of the speaker cables at your amplifier's speaker binding posts.

That said, you will still also need to reverse back the Polarity if you are listening to a different source that maybe also connected to your preamp.

Another way out would be to get your XLR cables custom made to be internally reversed as per the Accuphase Balanced Outputs configuration. This way you wont need to do anything else from the above options.

Hope this helps..

AP

# The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men # Samuel L. Jackson (Ezekiel 25:17)>Pulp Fiction< Current Set-Up..Plinius CD101->M8->SA-REF->Genesis IM-8300<-

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---