|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: PC for sub suggestions? posted by kef on March 29, 2024 at 09:33:14:
I have best luck with DIY made Belden 83804 on my SVS PB13-Ultra. If your sub doesn't require ground you can simply use 83804 in star-quad configuration (2 12awg for hot and neutral for 9awg equivalent). If you need a ground then you can add 12 AWG wire for the safety ground and twist it around 83804. Similarly you can use 83802 (2 conductor) or 83803 (3 conductor) belden cables. All Belden recipes I have listed offer the highest dynamics I have ever experienced with power PC, though I would use them only on subs or power amps if you don't have better options. I do have a fair number of brand name cables including TG Audio SLVR, VH Audio Airisine and lower end models.
Chris from VH audio was the original poster who suggested various DIY for these cables.
I wouldn't recommend Viborg MBU-1501 nor Accuphase 40th anniversary on the subwoofer. My experience with them is that they lack the frequencies extremes. I plan on writing review for both cables at some point.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: PC for sub suggestions? - tpaxadpom 21:32:44 11/04/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
