Checked speaker connection in back of integrated amp. When done I turned on power and got a steady 60hz hum coming from the amp. When I fiddled with the RCA end of my ICs, I could stop the hum by bending the IC part nearest the termination. If I moved it slightly, the hum started again. I resituated the amp in its usual position, reached behind and wiggled the IC til hum stopped. All now seems fine, but what is going on? Have I screwed up the IC by over bending in during re-placement of the amp at a previous time. Sorry for long post but these ICs cost $800 & I'm freakin' out. Can anyone offer help? Thanks.
DL69
This post is made possible by the generous support of people like you and our sponsors:
Topic - Bending interconnect causes amp hum sound - dlilly56 20:59:45 03/02/23 (2)
- RE: Bending interconnect causes amp hum sound - ABliss 11:00:33 03/03/23 (1)
- RE: Bending interconnect causes amp hum sound - dlilly56 15:28:59 03/03/23 (0)