Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Cable Asylum ]

---

[ Alert Moderator ]

---

Suggestion for bulk power cable and connectors

Posted by MagnusH (A) on July 7, 2022 at 04:58:47

The fuse box in our villa is in my HiFi room, so I am considering drawing a dedicated line from a dedicated fuse directly from the fuse box to a power distributor, and from the power distributor to my 2 NCore NC500 power amps and a LPS powering DAC and streamer. I also have an old Transparent PIXL power conditioner.

The chain would look like this:
- Fuse box -> Transparent PIXL -> power conditioner -> 2*amp and LPS.

I will make my own power distributor using Neotech awg 12 OCC copper, a chassis, and probably Viborg pure copper inlets.

I don't mind DIY, so I am looking for bulk power cable and then connectors for everything. But what would be a good and not to expensive bulk power cable to use?

One cable I read some good things about is Yarbo SP1100PW, but it will be a little on the expensive side considering I will need around 8 meters:
https://www.audiophonics.fr/en/cable-metre-cables-secteur/yarbo-sp-1100pw-triple-shielded-power-cable-occ-553mm-o165mm-p-6456.html

For connectors, I think I will go with Viborg pure copper, I typically clean them more often than any oxidation sets in so I don't think they need any plating and I imagine any gold, silver or rhodium will only decrease sound quality.

Any suggestions?

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---