|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: I'm close to buying the CF & ALum wall plate posted by mattcecil1@yahoo.com on April 17, 2007 at 10:06:54:
The problem screws are the four tiny ones that attach the outlet to the aluminium frame. The problem is that the screw heads are VERY soft and the philips slots are VERY small. The other screws are fine. It is way too easy to strip-out the heads. They really need to make those screws beefier. In my case I used 10ga wire, and trying to push the outlet and the leads back into the box, line up the holes with the frame and turn those f'ing little screws was the most difficult part of the entire re-wire job. Bigger slots and harder metal would be better.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I'm close to buying the CF & ALum wall plate - Sondek 14:45:19 04/17/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
