|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: Speaker Cable Problem - Long Run, Thin wire posted by Mike C on December 14, 2006 at 11:00:17:
The wooden framework presents a serious problem for twin-lead or similar cables, as the wood is a poor dielectric for audio. The Jon Risch cross-connected coax design would diminish this problem, but you would have to use double-lengths of a small-diameter coax cable to make it fit. The DC resistance is not an issue, and, if you know the impedance of the cable, you can provide dynamic loading to minimize normal-mode resonances.Look for something with Teflon dielectric.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- How is your access to surplus electronics materials? - Al Sekela 13:12:01 12/14/06 (1)
- Re: How is your access to surplus electronics materials? - Mike C 11:01:33 12/15/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
