|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: Cable Burn-in Question posted by Cpwill on November 27, 2006 at 17:52:51:
Here is how I burn in interconnects. I bought a pair of cheap RCA jacks. I soldered a resistor (any value between 20k and 50k Ohms is fine) between the hot and ground on each jack. Now I have a dummy load.I use a tuner, plug one end of the IC into the tuner and the other end into the RCA jack with resistor. I let it cook for a week or more. I have the tuner tuned to an FM music station, although I have no idea if breaking in a cable with music is any more or less effective than using inter-station noise to do the job.
Happy listening.
Regards,
JerryS
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Cable Burn-in Question - JerryS 07:32:44 11/29/06 (2)
- Except that - cdb 19:49:59 11/30/06 (1)
- Re: Except that - JerryS 07:45:21 12/01/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]