|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: How do you connect several Large Gauge Power Wires into a Switch? posted by Rich Stone on November 21, 2006 at 07:34:19:
get some 6 ga or 4 ga crimp connectors. Take some of the cable with you to see what fits. You need a connector that will take four 14 ga wires together. DO NOT use anything but the proper tool to crimp the connectors or you will have problems later. Crimp sleeves are also ok , if I can't find sleeves I just cut the ring from the connector lealing just the sleeve which I can crimp with a proper tool. Pliers are definitely out.
Hope this helps
Ed
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Go to an electrical supply house or marine store and... - eds65gto 14:07:53 11/22/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
